With this particularly stylish and ergonomic garden lounger you will make every neighbour jealous - have fun relaxing!
Refer to the material list for the materials and dimensions. It's easier to have the wooden parts cut to size in a DIY store. Alternatively, use a saw or hand-held circular saw and a guide.
Before the components get a coat of paint, the wood needs to be lightly sanded. Afterwards, use a dust-free microfibre cloth to ensure the surface is free from dust and dirt.
Before the components get a coat of paint, the wood needs to be lightly sanded. Afterwards, use a dust-free microfibre cloth to ensure the surface is free from dust and dirt.
Screw the cross struts to the side walls so that the frame can stand up. Then ensure the individual slats are spaced at an equal distance.
Our tip: place a spare piece of wood between the planks, so that the distance remains constant. Then simply staple the slats together with a strap to prevent them from moving when tightened.
Screw the cross struts to the side walls so that the frame can stand up. Then ensure the individual slats are spaced at an equal distance.
Our tip: place a spare piece of wood between the planks, so that the distance remains constant. Then simply staple the slats together with a strap to prevent them from moving when tightened.
Place the reclining surface on the frame and screw it to the side walls.
The spray unit is ready for use in just a few steps. Fill the paint container up to 3/4 full with paint and dilute it following the manufacturer’s instructions. To do this, use the included stirring stick – each notch corresponds to a 10% dilution. The suction pipe can be aligned depending on how you are going to work – forwards when spraying objects overhead and backwards when spraying downwards. The spray jet can also be adjusted in three directions – horizontally, vertically and diagonally. Carry out a test spray to find the right settings for you.
The spray unit is ready for use in just a few steps. Fill the paint container up to 3/4 full with paint and dilute it following the manufacturer’s instructions. To do this, use the included stirring stick – each notch corresponds to a 10% dilution. The suction pipe can be aligned depending on how you are going to work – forwards when spraying objects overhead and backwards when spraying downwards. The spray jet can also be adjusted in three directions – horizontally, vertically and diagonally. Carry out a test spray to find the right settings for you.
Start with the corners, edges and angles and then spray the surfaces. From the outside, spray over the slats at a uniform distance. Only change the direction of spray outside the slats. This avoids a build-up of thicker layers of paint during direction changes.
Start with the corners, edges and angles and then spray the surfaces. From the outside, spray over the slats at a uniform distance. Only change the direction of spray outside the slats. This avoids a build-up of thicker layers of paint during direction changes.
Learn here how best to proceed when spraying varnish, what you should look out for, why it's worth spraying varnishes and what the best equipment is for it.
Spraying varnishes
